2-Tier Hanging Planter Pots



Remove the planter from the package and separate the 2 pots, the 2 soil separators and the chain.


Insert the small soil separator into the small pot and the large soil separator into the large pot.


Insert the 3 hooks located in the middle of the chain into the 3 holes of the small planter.


After arranging the chain and making sure it’s hooked properly, insert the 3 hooks located on the end of the chain into the 3 holes of the large planter.


Lift the planter up to make sure both pots are aligned and not tilted. If they are, straighten the chain and make sure It’s not tangled.


Place both pots with the chain attached on a flat surface.


Put the appropriate amount of growing medium in each of the pots, leaving about 1 inch of clearance at the top of each and aerate the soil by breaking it with your hand or with a garden hoe. This will help your roots grow healthy and also ensures that water flows properly through the planter.


Pack your plants carefully into the soil, but make sure you don’t pack them too tightly.


Carefully read the growing instructions for the plants you are planting and make sure each of them is watered properly.


Take out the water plugs in each pot when you want to drain excess rainwater when you use the planter outdoor.


Hang your planter in a location that maximizes sun or shade depending on what you intend to grow and your planter, and all of it’s amazing contents, should be off to a great start!

Looking for more Amazing Products?

Check Out Our Amazon Store!

Proud of Your Creation?

Share it with the World! 

Use #myamazingplanter to be featured on our Instagram Page and let everyone witness your green thumb!

And don’t forget to register your Warranty HERE!

Scroll to Top